igor158

ZyXEL KEENETIC GIGA

Рекомендованные сообщения

13 часов назад, Юрий-76 сказал:

 

 

  Скрыть содержимое

Oct 29 00:00:02 ndm: kernel: Linux version 2.6.23.17 (developers@ndmsystems.com) (gcc version 4.1.2) #1 Fri Jul 3 10:13:42 MSK 2015
Oct 29 00:00:02 ndm: kernel:  RT3052 CPU Detected!
Oct 29 00:00:02 ndm: kernel:  The CPU frequency set to 384 MHz
Oct 29 00:00:02 ndm: kernel:  64M RAM Detected!
Oct 29 00:00:02 ndm: kernel: CPU revision is: 0001964c
Oct 29 00:00:02 ndm: kernel: Determined physical RAM map:
Oct 29 00:00:02 ndm: kernel:  memory: 04000000 @ 00000000 (usable)
Oct 29 00:00:02 ndm: kernel: On node 0 totalpages: 16384
Oct 29 00:00:02 ndm: kernel:   Normal zone: 128 pages used for memmap
Oct 29 00:00:02 ndm: kernel:   Normal zone: 0 pages reserved
Oct 29 00:00:02 ndm: kernel:   Normal zone: 16256 pages, LIFO batch:3
Oct 29 00:00:02 ndm: kernel:   Movable zone: 0 pages used for memmap
Oct 29 00:00:02 ndm: kernel: Built 1 zonelists in Zone order.  Total pages: 16256
Oct 29 00:00:02 ndm: kernel: Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs ramdisk=0x0fd1 load_ramdisk=1 prompt_ramdisk=0 noinitrd
Oct 29 00:00:02 ndm: kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Oct 29 00:00:02 ndm: kernel: Primary data cache 16kB, 4-way, linesize 32 bytes.
Oct 29 00:00:02 ndm: kernel: Synthesized TLB refill handler (20 instructions).
Oct 29 00:00:02 ndm: kernel: Synthesized TLB load handler fastpath (32 instructions).
Oct 29 00:00:02 ndm: kernel: Synthesized TLB store handler fastpath (32 instructions).
Oct 29 00:00:02 ndm: kernel: Synthesized TLB modify handler fastpath (31 instructions).
Oct 29 00:00:02 ndm: kernel: Cache parity protection disabled
Oct 29 00:00:02 ndm: kernel: cause = c0808060, status = 11000000
Oct 29 00:00:02 ndm: kernel: PID hash table entries: 256 (order: 8, 1024 bytes)
Oct 29 00:00:02 ndm: kernel: calculating r4koff... 0005dc00(384000)
Oct 29 00:00:02 ndm: kernel: CPU frequency 384.00 MHz
Oct 29 00:00:02 ndm: kernel: Using 192.000 MHz high precision timer.
Oct 29 00:00:02 ndm: kernel: console [ttyS1] enabled
Oct 29 00:00:02 ndm: kernel: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 29 00:00:02 ndm: kernel: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 29 00:00:02 ndm: kernel: Memory: 62128k/65536k available (2208k kernel code, 3352k reserved, 331k data, 128k init, 0k highmem)
Oct 29 00:00:02 ndm: kernel: Calibrating delay loop... 254.97 BogoMIPS (lpj=127488)
Oct 29 00:00:02 ndm: kernel: Mount-cache hash table entries: 512
Oct 29 00:00:02 ndm: kernel: NET: Registered protocol family 16
Oct 29 00:00:02 ndm: kernel: Generic PHY: Registered new driver
Oct 29 00:00:02 ndm: kernel: SCSI subsystem initialized
Oct 29 00:00:02 ndm: kernel: Time: MIPS clocksource has been installed.
Oct 29 00:00:02 ndm: kernel: NET: Registered protocol family 2
Oct 29 00:00:02 ndm: kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 29 00:00:02 ndm: kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Oct 29 00:00:02 ndm: kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Oct 29 00:00:02 ndm: kernel: TCP: Hash tables configured (established 2048 bind 2048)
Oct 29 00:00:02 ndm: kernel: TCP reno registered
Oct 29 00:00:03 ndm: kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Oct 29 00:00:03 ndm: kernel: io scheduler noop registered
Oct 29 00:00:03 ndm: kernel: io scheduler deadline registered (default)
Oct 29 00:00:03 ndm: kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Oct 29 00:00:03 ndm: kernel: N_HDLC line discipline registered.
Oct 29 00:00:03 ndm: kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
Oct 29 00:00:03 ndm: kernel: serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
Oct 29 00:00:03 ndm: kernel: serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
Oct 29 00:00:03 ndm: kernel: RAMDISK driver initialized: 1 RAM disks of 4049K size 4096 blocksize
Oct 29 00:00:03 ndm: kernel: loop: module loaded
Oct 29 00:00:03 ndm: kernel: Ralink APSoC Ethernet Driver Initilization. v2.0_ndms  256 rx/tx descriptors allocated, mtu = 1500!
Oct 29 00:00:03 ndm: kernel: NAPI enable, weight = 0, Tx Ring = 256, Rx Ring = 256
Oct 29 00:00:03 ndm: kernel: PROC INIT OK!
Oct 29 00:00:03 ndm: kernel: Switch AR8316 found in MAC mode.
Oct 29 00:00:03 ndm: kernel: PPP generic driver version 2.4.2
Oct 29 00:00:03 ndm: kernel: PPP Deflate Compression module registered
Oct 29 00:00:03 ndm: kernel: PPP BSD Compression module registered
Oct 29 00:00:03 ndm: kernel: MPPE/MPPC encryption/compression module registered
Oct 29 00:00:03 ndm: kernel: NET: Registered protocol family 24
Oct 29 00:00:03 ndm: kernel: L2TP kernel driver, v1.04
Oct 29 00:00:03 ndm: kernel: PPTP driver version 0.8.5.1
Oct 29 00:00:03 ndm: kernel: tun: Universal TUN/TAP device driver, 1.6
Oct 29 00:00:03 ndm: kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 29 00:00:03 ndm: kernel: ralink flash device: 0x800000 at 0x1f000000
Oct 29 00:00:03 ndm: kernel: Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Oct 29 00:00:03 ndm: kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Oct 29 00:00:03 ndm: kernel: number of CFI chips: 1
Oct 29 00:00:03 ndm: kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Oct 29 00:00:03 ndm: kernel: Creating 8 MTD partitions on "Ralink SoC physically mapped flash":
Oct 29 00:00:03 ndm: kernel: 0x00000000-0x00030000 : "U-Boot"
Oct 29 00:00:03 ndm: kernel: 0x00030000-0x00040000 : "U-Config"
Oct 29 00:00:03 ndm: kernel: 0x00040000-0x00050000 : "RF-EEPROM"
Oct 29 00:00:03 ndm: kernel: 0x00050000-0x00180000 : "Kernel"
Oct 29 00:00:03 ndm: kernel: 0x00180000-0x005f0000 : "RootFS"
Oct 29 00:00:03 ndm: kernel: 0x00050000-0x005f0000 : "Firmware"
Oct 29 00:00:03 ndm: kernel: 0x005f0000-0x00600000 : "Config"
Oct 29 00:00:03 ndm: kernel: 0x00600000-0x00800000 : "Storage"
Oct 29 00:00:03 ndm: kernel: u32 classifier
Oct 29 00:00:03 ndm: kernel: Netfilter messages via NETLINK v0.30.
Oct 29 00:00:03 ndm: kernel: nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Oct 29 00:00:04 ndm: kernel: ctnetlink v0.93: registering with nfnetlink.
Oct 29 00:00:04 ndm: kernel: IPv4 over IPv4 tunneling driver
Oct 29 00:00:04 ndm: kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 29 00:00:04 ndm: kernel: Type NAT: Restricted Cone
Oct 29 00:00:04 ndm: kernel: ClusterIP Version 0.8 loaded successfully
Oct 29 00:00:04 ndm: kernel: TCP bic registered
Oct 29 00:00:04 ndm: kernel: TCP cubic registered
Oct 29 00:00:04 ndm: kernel: TCP westwood registered
Oct 29 00:00:04 ndm: kernel: TCP highspeed registered
Oct 29 00:00:04 ndm: kernel: TCP hybla registered
Oct 29 00:00:04 ndm: kernel: TCP htcp registered
Oct 29 00:00:04 ndm: kernel: TCP vegas registered
Oct 29 00:00:04 ndm: kernel: TCP scalable registered
Oct 29 00:00:04 ndm: kernel: NET: Registered protocol family 1
Oct 29 00:00:04 ndm: kernel: NET: Registered protocol family 17
Oct 29 00:00:04 ndm: kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 29 00:00:04 ndm: kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 29 00:00:04 ndm: kernel: decoding /dev/mtdblock4...
Oct 29 00:00:04 ndm: kernel: RAMDISK: squashfs filesystem found at block 0
Oct 29 00:00:04 ndm: kernel: RAMDISK: Loading 4046KiB [1 disk] into ram disk... done.
Oct 29 00:00:04 ndm: kernel: Mounting ramdisk...
Oct 29 00:00:04 ndm: kernel: VFS: Mounted root (squashfs filesystem) readonly.
Oct 29 00:00:04 ndm: kernel: Freeing unused kernel memory: 128k freed
Oct 29 00:00:04 ndm: Core::Main: ***
Oct 29 00:00:04 ndm: Core::Main: *** Network Device Manager v2.04(USD.2)C7.
Oct 29 00:00:04 ndm: Core::Main: *** Built Jul  3 2015 10:12:20.
Oct 29 00:00:04 ndm: Core::Main: ***
Oct 29 00:00:07 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/lm.ko.
Oct 29 00:00:07 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/usbcore.ko.
Oct 29 00:00:07 ndm: kernel: usbcore: registered new interface driver usbfs
Oct 29 00:00:07 ndm: kernel: usbcore: registered new interface driver hub
Oct 29 00:00:07 ndm: kernel: usbcore: registered new device driver usb
Oct 29 00:00:07 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_nat_proto_gre.ko.
Oct 29 00:00:07 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/fastnat.ko.
Oct 29 00:00:08 ndm: kernel: Run Fast NAT.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/powerstat.ko.
Oct 29 00:00:08 ndm: kernel: Start powerstat module.
Oct 29 00:00:08 ndm: kernel: Read power status register: 0x00000000.
Oct 29 00:00:08 ndm: kernel: Status: Power was turned off.
Oct 29 00:00:08 ndm: kernel: Write power status register: 0x00000001.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_conntrack_sip.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/jffs2.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/tntfs.ko.
Oct 29 00:00:08 ndm: kernel: tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Oct 29 00:00:08 ndm: kernel: Tuxera NTFS driver 3013.9.18 [Flags: R/W MODULE].
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/fastvpn.ko.
Oct 29 00:00:08 ndm: kernel: fast vpn init, v1.01
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_conntrack_ftp.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_conntrack_rtsp.ko.
Oct 29 00:00:08 ndm: kernel: nf_conntrack_rtsp v0.6.21 loading
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/phr.ko.
Oct 29 00:00:08 ndm: kernel: phr: I/O peripheral driver. (C) 2013, 2014 NDM Systems Inc., v1.2.7
Oct 29 00:00:08 ndm: kernel: phr: "kng_ra" platform driver loaded
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_conntrack_proto_gre.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/jbd.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/tfat.ko.
Oct 29 00:00:08 ndm: kernel: Tuxera FAT 12/16/32 driver version 3014.4.15 [Flags: R/W MODULE].
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/sd_mod.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/ext2.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/ralink_wdt.ko.
Oct 29 00:00:08 ndm: kernel: Load Kernel WDG Timer Module
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/resetnds.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_conntrack_pptp.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_nat_pptp.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/usbserial.ko.
Oct 29 00:00:08 ndm: kernel: usbcore: registered new interface driver usbserial
Oct 29 00:00:08 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/ext3.ko.
Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_nat_ftp.ko.
Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/option.ko.
Oct 29 00:00:09 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Oct 29 00:00:09 ndm: kernel: usbcore: registered new interface driver option
Oct 29 00:00:09 ndm: kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/dwc_otg.ko.
Oct 29 00:00:09 ndm: kernel: dwc_otg: version 2.72a 24-JUN-2008
Oct 29 00:00:09 ndm: kernel: DWC_otg: Core Release: 2.66a
Oct 29 00:00:09 ndm: kernel: DWC_otg: Periodic Transfer Interrupt Enhancement - disabled
Oct 29 00:00:09 ndm: kernel: DWC_otg: Multiprocessor Interrupt Enhancement - disabled
Oct 29 00:00:09 ndm: kernel: DWC_otg: Using DMA mode
Oct 29 00:00:09 ndm: kernel: DWC_otg: Device using Buffer DMA mode
Oct 29 00:00:09 ndm: kernel: dwc_otg lm0: DWC OTG Controller
Oct 29 00:00:09 ndm: kernel: dwc_otg lm0: new USB bus registered, assigned bus number 1
Oct 29 00:00:09 ndm: kernel: dwc_otg lm0: irq 18, io mem 0x00000000
Oct 29 00:00:09 ndm: kernel: DWC_otg: Init: Port Power? op_state=1
Oct 29 00:00:09 ndm: kernel: DWC_otg: Init: Power Port (0)
Oct 29 00:00:09 ndm: kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 29 00:00:09 ndm: kernel: hub 1-0:1.0: USB hub found
Oct 29 00:00:09 ndm: kernel: hub 1-0:1.0: 1 port detected
Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_nat_sip.ko.
Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/usbnet.ko.
Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/sierra.ko.
Oct 29 00:00:09 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
Oct 29 00:00:09 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
Oct 29 00:00:09 ndm: kernel: usb 1-1: new high speed USB device using dwc_otg and address 2
Oct 29 00:00:09 ndm: kernel: usb 1-1: configuration #1 chosen from 1 choice
Oct 29 00:00:09 ndm: kernel: hub 1-1:1.0: USB hub found
Oct 29 00:00:09 ndm: kernel: hub 1-1:1.0: 4 ports detected
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver sierra
Oct 29 00:00:10 ndm: kernel: drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.2.5b
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/hw_cdc_net.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver huawei_ether
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/ueservice.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver ueservice
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/usblp.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver usblp
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/cdc-acm.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver cdc_acm
Oct 29 00:00:10 ndm: kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/usb-storage.ko.
Oct 29 00:00:10 ndm: kernel: Initializing USB Mass Storage driver...
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver usb-storage
Oct 29 00:00:10 ndm: kernel: USB Mass Storage support registered.
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/nf_nat_rtsp.ko.
Oct 29 00:00:10 ndm: kernel: nf_nat_rtsp v0.6.21 loading
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/dm9620.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver dm9620
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/asix.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver asix
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/cdc_ether.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver cdc_ether
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/ue_lte.ko.
Oct 29 00:00:10 ndm: kernel: usbcore: registered new interface driver ue_lte
Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/rndis_host.ko.
Oct 29 00:00:11 ndm: kernel: usbcore: registered new interface driver rndis_host
Oct 29 00:00:11 ndm: FileSystem::Temp: mounting /var/...
Oct 29 00:00:11 ndm: FileSystem::Storage: mounting /storage...
Oct 29 00:00:11 ndm: Core::Authenticator: md5 generator created.
Oct 29 00:00:11 ndm: Core::Authenticator: nt generator created.
Oct 29 00:00:11 ndm: Core::Authenticator: generating.
Oct 29 00:00:11 ndm: Core::Authenticator: "readonly" tag registered.
[E] Oct 29 00:00:11 ndm: Core::System::UConfig: key not found: servicehost.
Oct 29 00:00:11 ndm: Core::System::Timezone: building a timezone list...
Oct 29 00:00:11 ndm: Core::System::Timezone: scanning done (272 timezone(s) available).
Oct 29 00:00:11 ndm: Core::System::Timezone: the system timezone is set to "GMT".
Oct 29 00:00:11 ndm: Core::System::Timezone: the system timezone reset to default.
Oct 29 00:00:11 ndm: HTTP::Server: initializing...
Oct 29 00:00:11 ndm: Core::Authenticator: "http" tag registered.
Oct 29 00:00:11 ndm: Dns::Manager: DNS proxy enabled.
Oct 29 00:00:11 ndm: Core::Authenticator: "printers" tag registered.
Oct 29 00:00:11 ndm: Core::Authenticator: "cifs" tag registered.
Oct 29 00:00:12 ndm: Core::Authenticator: "ftp" tag registered.
Oct 29 00:00:12 ndm: Ntp::Client: configuration reset.
Oct 29 00:00:12 ndm: HTTP::ServerApp: ready.
Oct 29 00:00:12 ndnproxy: ndnproxy 1_0_6 started.
Oct 29 00:00:12 ndnproxy: static entry added: localhost. 127.0.0.1.
Oct 29 00:00:12 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.
Oct 29 00:00:12 ndnproxy: stats. file: /var/ndnproxymain.stat.
Oct 29 00:00:12 ndnproxy: can not create IPv6 output socket for RPC requests, continue.
Oct 29 00:00:12 ndm: Network::Interface::MAC: backed up the default address 00:0c:43:28:80:77 of "Switch0" before changing.
Oct 29 00:00:12 ndm: Network::Interface::Repository: wrapped "eth2" as "Switch".
Oct 29 00:00:12 ndm: Core::System::DriverManager: usbnet.ko driver is loaded, counter = 2.
Oct 29 00:00:12 ndm: Core::System::DriverManager: asix.ko driver is loaded, counter = 2.
Oct 29 00:00:12 ndm: Core::System::DriverManager: dm9620.ko driver is loaded, counter = 2.
Oct 29 00:00:12 ndm: Core::System::DriverManager: cdc_ether.ko driver is loaded, counter = 2.
Oct 29 00:00:12 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/rt2860v2_ap.ko.
Oct 29 00:00:13 ndm: kernel: RT305x_ChipSpecInit: CHIP_SPEC_ID_NUM(3)
Oct 29 00:00:13 ndnproxy: ndnproxy stopped.
Oct 29 00:00:13 ndnproxy: ndnproxy 1_0_6 started.
Oct 29 00:00:13 ndnproxy: static entry added: localhost. 127.0.0.1.
Oct 29 00:00:13 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.
Oct 29 00:00:13 ndnproxy: stats. file: /var/ndnproxymain.stat.
Oct 29 00:00:13 ndnproxy: can not create IPv6 output socket for RPC requests, continue.
Oct 29 00:00:15 ndm: Network::Interface::Rtx::WifiMaster: no default country specified, "Albania" used.
Oct 29 00:00:15 ndm: Network::Interface::Rtx::WifiMaster: channel bandwidth settings reset to default.
Oct 29 00:00:17 wmond: ra0: (RT2860) BSS(ra0) channel switched to 11.
Oct 29 00:00:17 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.
Oct 29 00:00:17 ndm: Network::Interface::Radio: the radio switch state is changed to off, software state is up [WifiMaster0].
Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "ra0" as "WifiMaster".
Oct 29 00:00:21 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) disconnects with our wireless client.
Oct 29 00:00:24 ndm: Network::Interface::Repository: wrapped "ra0" as "AccessPoint".
Oct 29 00:00:24 wmond: ra0: (RT2860) BSS(ra0) channel switched to 13.
Oct 29 00:00:24 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.
Oct 29 00:00:28 ndm: Network::Interface::Repository: wrapped "ra1" as "AccessPoint".
Oct 29 00:00:33 ndm: Network::Interface::Repository: wrapped "ra2" as "AccessPoint".
Oct 29 00:00:38 ndm: Network::Interface::Repository: wrapped "ra3" as "AccessPoint".
Oct 29 00:00:38 ndm: Network::Interface::Repository: wrapped "apcli0" as "WifiStation".
Oct 29 00:00:38 ndm: Module::Manager: 39 modules loaded.
Oct 29 00:00:38 ndm: Network::Interface::Radio: the radio switch state is changed to on, software state is down [WifiMaster0].
Oct 29 00:00:38 ndm: FileSystem::Proc: system setting saved.
Oct 29 00:00:38 ndm: Syslog: last message repeated 5 times.
Oct 29 00:00:38 ndm: Core::System::Hostname: the host name set.
Oct 29 03:00:38 ndm: Core::System::Timezone: the system timezone is set to "Europe/Moscow".
Oct 29 03:09:19 ndm: Core::System::Clock: system date and time has changed.
Oct 29 03:09:19 ndm: Core::System::Domainname: the system domain name set.
Oct 29 03:09:19 ndm: Ntp::Client: server "0.pool.ntp.org" has been added.
Oct 29 03:09:19 ndm: Ntp::Client: server "1.pool.ntp.org" has been added.
Oct 29 03:09:19 ndm: Ntp::Client: server "2.pool.ntp.org" has been added.
Oct 29 03:09:19 ndm: Ntp::Client: server "3.pool.ntp.org" has been added.
Oct 29 03:09:19 ndm: Command::LogResponse: Applied.
Oct 29 03:09:19 ndm: DynDns::Client: profile "_WEBADMIN" has been created.
Oct 29 03:09:20 ndm: Command::LogResponse: Access mode enabled.
Oct 29 03:09:20 ndm: Command::LogResponse: Access vlan identifier saved.
Oct 29 03:09:20 ndm: Command::LogResponse: Access mode enabled.
Oct 29 03:09:20 ndm: Command::LogResponse: Access vlan identifier saved.
Oct 29 03:09:20 ndm: Command::LogResponse: Access mode enabled.
Oct 29 03:09:20 ndm: Command::LogResponse: Access vlan identifier saved.
Oct 29 03:09:20 ndm: Command::LogResponse: Access mode enabled.
Oct 29 03:09:20 ndm: Command::LogResponse: Access vlan identifier saved.
Oct 29 03:09:20 ndm: Command::LogResponse: Access mode enabled.
Oct 29 03:09:20 ndm: Command::LogResponse: Access vlan identifier saved.
Oct 29 03:09:20 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:20 ndm: Network::Interface::Repository: created interface Switch0/VLAN1.
Oct 29 03:09:21 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:21 ndm: Command::LogResponse: Interface set as private.
Oct 29 03:09:21 ndm: Dhcp::Client: Switch0/VLAN1 DHCP client DNS host routes are enabled.
Oct 29 03:09:21 ndm: Dhcp::Client: Switch0/VLAN1 DHCP name servers are enabled.
Oct 29 03:09:21 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:21 ndm: Network::Interface::Repository: created interface Switch0/VLAN2.
Oct 29 03:09:22 ndm: Command::LogResponse: Interface renamed.
Oct 29 03:09:22 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:22 ndm: kernel: device eth2 entered promiscuous mode
Oct 29 03:09:22 ndm: Command::LogResponse: Interface set as public.
Oct 29 03:09:22 ndm: Dhcp::Client: started DHCP client on Switch0/VLAN2.
Oct 29 03:09:22 ndm: Dhcp::Client: Switch0/VLAN2 DHCP client DNS host routes are enabled.
Oct 29 03:09:22 ndm: Dhcp::Client: Switch0/VLAN2 DHCP name servers are enabled.
Oct 29 03:09:22 ndm: Command::LogResponse: MTU saved.
Oct 29 03:09:22 ndm: Command::LogResponse: Interface is set as global.
Oct 29 03:09:22 ndm: Igmp::Proxy: upstream role assigned to Switch0/VLAN2.
Oct 29 03:09:22 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:23 ndm: Command::LogResponse: Country code set.
Oct 29 03:09:23 ndm: Command::LogResponse: Compatibility set.
Oct 29 03:09:23 ndm: Network::Interface::Rtx::WifiMaster: a channel bandwidth setting applied.
Oct 29 03:09:23 ndm: Command::LogResponse: Power level applied.
Oct 29 03:09:23 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: Interface renamed.
Oct 29 03:09:24 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:24 ndm: Command::LogResponse: set access-policy: none.
Oct 29 03:09:24 ndm: Command::LogResponse: Interface set as private.
Oct 29 03:09:24 ndm: Network::Interface::Rtx::Wps: "WifiMaster0/AccessPoint0" WPS enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: Pre-shared key saved.
Oct 29 03:09:24 ndm: Command::LogResponse: Wireless encryption enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: WPA algorithms enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: WPA2 algorithms enabled.
Oct 29 03:09:24 ndm: Dhcp::Client: WifiMaster0/AccessPoint0 DHCP client DNS host routes are enabled.
Oct 29 03:09:24 ndm: Dhcp::Client: WifiMaster0/AccessPoint0 DHCP name servers are enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: SSID saved.
Oct 29 03:09:24 ndm: Command::LogResponse: WMM extensions enabled.
Oct 29 03:09:24 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:25 ndm: Command::LogResponse: Interface renamed.
Oct 29 03:09:25 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:25 ndm: Command::LogResponse: set access-policy: none.
Oct 29 03:09:25 ndm: Command::LogResponse: Interface set as private.
Oct 29 03:09:25 ndm: Command::LogResponse: Network address saved.
Oct 29 03:09:25 ndm: Dhcp::Client: WifiMaster0/AccessPoint1 DHCP client DNS host routes are enabled.
Oct 29 03:09:25 ndm: Dhcp::Client: WifiMaster0/AccessPoint1 DHCP name servers are enabled.
Oct 29 03:09:25 ndm: Command::LogResponse: SSID saved.
Oct 29 03:09:25 ndm: Command::LogResponse: WMM extensions enabled.
Oct 29 03:09:25 ndm: Command::LogResponse: Interface disabled.
Oct 29 03:09:26 ndm: Command::LogResponse: set access-policy: none.
Oct 29 03:09:26 ndm: Command::LogResponse: Interface set as public.
Oct 29 03:09:26 ndm: Dhcp::Client: WifiMaster0/AccessPoint2 DHCP client DNS host routes are enabled.
Oct 29 03:09:26 ndm: Dhcp::Client: WifiMaster0/AccessPoint2 DHCP name servers are enabled.
Oct 29 03:09:26 ndm: Command::LogResponse: Interface disabled.
Oct 29 03:09:27 ndm: Command::LogResponse: set access-policy: none.
Oct 29 03:09:27 ndm: Command::LogResponse: Interface set as public.
Oct 29 03:09:27 ndm: Dhcp::Client: WifiMaster0/AccessPoint3 DHCP client DNS host routes are enabled.
Oct 29 03:09:27 ndm: Dhcp::Client: WifiMaster0/AccessPoint3 DHCP name servers are enabled.
Oct 29 03:09:27 ndm: Command::LogResponse: Interface disabled.
Oct 29 03:09:28 ndm: Command::LogResponse: Interface set as public.
Oct 29 03:09:28 ndm: Command::LogResponse: Wireless encryption disabled.
Oct 29 03:09:28 ndm: Dhcp::Client: started DHCP client on WifiMaster0/WifiStation0.
Oct 29 03:09:28 ndm: Dhcp::Client: WifiMaster0/WifiStation0 DHCP client DNS host routes are enabled.
Oct 29 03:09:28 ndm: Dhcp::Client: WifiMaster0/WifiStation0 DHCP name servers are enabled.
Oct 29 03:09:28 ndm: Command::LogResponse: Interface disabled.
Oct 29 03:09:28 ndm: Network::Interface::Repository: created interface Bridge0.
Oct 29 03:09:29 ndm: Command::LogResponse: Interface renamed.
Oct 29 03:09:29 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:29 ndm: Network::Interface::MAC: backed up the default address 00:00:00:00:00:00 of "Home" before changing.
Oct 29 03:09:29 ndm: kernel: device eth2.1 entered promiscuous mode
Oct 29 03:09:29 ndm: kernel: br0: port 1(eth2.1) entering learning state
Oct 29 03:09:29 ndm: Command::LogResponse: Interface acquired.
Oct 29 03:09:29 ndm: kernel: device ra0 entered promiscuous mode
Oct 29 03:09:29 ndm: kernel: br0: port 2(ra0) entering learning state
Oct 29 03:09:29 ndm: Command::LogResponse: Interface acquired.
Oct 29 03:09:29 ndm: Command::LogResponse: Interface set as private.
Oct 29 03:09:29 ndm: Command::LogResponse: Network address saved.
Oct 29 03:09:29 ndm: Dhcp::Client: Bridge0 DHCP client DNS host routes are enabled.
Oct 29 03:09:29 ndm: Dhcp::Client: Bridge0 DHCP name servers are enabled.
Oct 29 03:09:29 ndm: Igmp::Proxy: added downstream interface Bridge0.
Oct 29 03:09:29 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:29 ndm: Network::Interface::Repository: created interface L2TP0.
Oct 29 03:09:30 ndm: kernel: br0: topology change detected, propagating
Oct 29 03:09:30 ndm: kernel: br0: port 1(eth2.1) entering forwarding state
Oct 29 03:09:30 ndm: kernel: br0: topology change detected, propagating
Oct 29 03:09:30 ndm: kernel: br0: port 2(ra0) entering forwarding state
Oct 29 03:09:30 ndm: Command::LogResponse: Interface description saved.
Oct 29 03:09:30 ndm: Command::LogResponse: IPv6CP disabled.
Oct 29 03:09:30 ndm: Command::LogResponse: LCP echo parameters updated.
Oct 29 03:09:30 ndm: Command::LogResponse: Using peer as a default gateway.
Oct 29 03:09:30 ndm: Command::LogResponse: Using remote name servers.
Oct 29 03:09:30 ndm: Command::LogResponse: DNS routes enabled.
Oct 29 03:09:30 ndm: Command::LogResponse: CCP disabled.
Oct 29 03:09:30 ndm: Command::LogResponse: Interface set as public.
Oct 29 03:09:30 ndm: Command::LogResponse: Identity saved.
Oct 29 03:09:30 ndm: Command::LogResponse: Password saved.
Oct 29 03:09:30 ndm: Dhcp::Client: L2TP0 DHCP client DNS host routes are enabled.
Oct 29 03:09:30 ndm: Dhcp::Client: L2TP0 DHCP name servers are enabled.
Oct 29 03:09:30 ndm: Command::LogResponse: MTU saved.
Oct 29 03:09:30 ndm: Command::LogResponse: Interface is set as global.
Oct 29 03:09:30 ndm: Command::LogResponse: TCP-MSS adjustment enabled.
Oct 29 03:09:30 ndm: Network::Interface::PPP: L2TP0 connection service standby.
Oct 29 03:09:30 ndm: Command::LogResponse: PPP connection enabled.
Oct 29 03:09:30 ndm: Command::LogResponse: Interface enabled.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN" has been created.
Oct 29 03:09:30 ndm: Dhcp::Pool: pool "_WEBADMIN" range has been saved.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN" bound to interface Home.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN" is enabled.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" has been created.
Oct 29 03:09:30 ndm: Dhcp::Pool: pool "_WEBADMIN_GUEST_AP" range has been saved.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" bound to interface GuestWiFi.
Oct 29 03:09:30 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" is enabled.
Oct 29 03:09:30 ndm: Command::LogResponse: NAT rule added.
Oct 29 03:09:30 ndm: Command::LogResponse: NAT rule added.
Oct 29 03:09:30 ndm: Network::Interface::Rtx::Ppe: PPE enabled.
Oct 29 03:09:30 ndm: UPnP::Manager: using LAN interface: Bridge0.
Oct 29 03:09:30 ndm: Core::Authenticator: password has been changed for user "admin".
Oct 29 03:09:30 ndm: Core::Authenticator: password has been changed for user "admin".
Oct 29 03:09:30 ndm: Core::Authenticator: user "admin" tagged with "cli".
Oct 29 03:09:30 ndm: Core::Authenticator: user "admin" tagged with "http".
Oct 29 03:09:30 ndm: Core::Authenticator: user "admin" tagged with "ftp".
Oct 29 03:09:30 ndm: Core::Authenticator: user "admin" tagged with "cifs".
Oct 29 03:09:30 ndm: Core::Authenticator: user "admin" tagged with "printers".
Oct 29 03:09:30 ndm: Dhcp::Server: service enabled.
Oct 29 03:09:30 ndm: Dns::Manager: DNS proxy enabled.
Oct 29 03:09:30 ndm: Core::ServiceLock: IPTV is locked by IGMP.
Oct 29 03:09:30 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/igmpsn.ko.
Oct 29 03:09:31 ndm: kernel: IGMP proxy with snooping. (C) 2014 NDM Systems Inc., v2.3.2
Oct 29 03:09:31 ndm: kernel: igmpsn v2.3.2 loaded (mode: 00000001)
Oct 29 03:09:31 ndm: Igmp::Proxy: IGMP proxy enabled.
Oct 29 03:09:31 ndm: Command::LogResponse: CIFS server enabled.
Oct 29 03:09:31 ndm: HTTP::Server: HTTP server enabled.
Oct 29 03:09:31 ndm: Telnet::Server: telnet server enabled.
Oct 29 03:09:31 ndm: Ntp::Client: NTP client enabled.
Oct 29 03:09:31 ndm: Core::Hotplug::Manager: scanning hardware...
Oct 29 03:09:31 ndm: Core::Hotplug::Manager: scanning hardware: done.
Oct 29 03:09:31 ndm: Core::System::DriverManager: loading /lib/modules/2.6.23-rt/hw_nat.ko.
Oct 29 03:09:31 ndm: Core::Init: system ready.
Oct 29 03:09:33 ndnproxy: updating configuration...
Oct 29 03:09:33 ndnproxy: static entry added: localhost. 127.0.0.1.
Oct 29 03:09:33 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.
Oct 29 03:09:33 ndnproxy: stats. file: /var/ndnproxymain.stat.
Oct 29 03:09:33 ndhcps: _WEBADMIN: NDM DHCP server (version 2.9.8) started.
Oct 29 03:09:33 ndm: Ntp::Client: unable to communicate with "1.pool.ntp.org".
Oct 29 03:09:33 ndm: Ntp::Client: could not synchronize, waiting...
Oct 29 03:09:33 telnetd: waiting for connections...
Oct 29 03:09:36 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) disconnects with our wireless client.
Oct 29 03:09:36 ndm: kernel: br0: port 2(ra0) entering disabled state
Oct 29 03:09:40 ndm: kernel: br0: port 2(ra0) entering learning state
Oct 29 03:09:40 wmond: WifiMaster0/AccessPoint0: (RT2860) BSS(ra0) channel switched to 11.
Oct 29 03:09:40 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.
Oct 29 03:09:40 ndm: Core::Server: started a new session.
Oct 29 03:09:40 ndm: Core::Session: client disconnected.
Oct 29 03:09:40 ndm: Core::Server: started a new session.
Oct 29 03:09:40 ag: HTTP::ServerApp: ready.
Oct 29 03:09:41 ndm: kernel: br0: topology change detected, propagating
Oct 29 03:09:41 ndm: kernel: br0: port 2(ra0) entering forwarding state
Oct 29 03:09:45 ndm: Ntp::Client: unable to communicate with "2.pool.ntp.org".
Oct 29 03:09:45 ndm: Ntp::Client: could not synchronize, waiting...
Oct 29 03:09:47 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) disconnects with our wireless client.
Oct 29 03:09:47 ndm: kernel: br0: port 2(ra0) entering disabled state
Oct 29 03:09:51 ndm: kernel: br0: port 2(ra0) entering learning state
Oct 29 03:09:51 wmond: WifiMaster0/AccessPoint0: (RT2860) BSS(ra0) channel switched to 11.
Oct 29 03:09:51 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.
Oct 29 03:09:51 ndm: Cifs::ServerNQ: service started.
Oct 29 03:09:52 ndm: kernel: br0: topology change detected, propagating
Oct 29 03:09:52 ndm: kernel: br0: port 2(ra0) entering forwarding state
Oct 29 03:09:57 ndm: Ntp::Client: unable to communicate with "3.pool.ntp.org".
Oct 29 03:09:57 ndm: Ntp::Client: could not synchronize, waiting...
Oct 29 03:10:09 ndm: Ntp::Client: unable to communicate with "0.pool.ntp.org".
Oct 29 03:10:09 ndm: Ntp::Client: could not synchronize, waiting...
Oct 29 03:10:13 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(64:70:02:0d:08:41) had associated successfully.
Oct 29 03:10:13 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(64:70:02:0d:08:41) set key done in WPA2/WPA2PSK.
Oct 29 03:10:13 ndhcps: _WEBADMIN: DHCPDISCOVER received  for 192.168.1.33 from 64:70:02:0d:08:41.
Oct 29 03:10:14 ndhcps: _WEBADMIN: making OFFER of 192.168.1.33 to 64:70:02:0d:08:41.
Oct 29 03:10:14 ndhcps: _WEBADMIN: DHCPREQUEST received (STATE_SELECTING) for 192.168.1.33 from 64:70:02:0d:08:41.
Oct 29 03:10:14 ndhcps: _WEBADMIN: sending ACK of 192.168.1.33 to 64:70:02:0d:08:41.
Oct 29 03:13:12 ndm: Network::Interface::Switch: switch link up at port WAN (Switch0).
Oct 29 03:13:12 ndm: Network::Interface::PPP: L2TP0 connection service standby.
Oct 29 03:13:14 ndhcpc: Switch0/VLAN2: NDM DHCP client (version 2.9.8) started.
Oct 29 03:14:42 ndm: Core::Debug: system debug enabled.
Oct 29 03:14:42 ndm: Network::Interface::PPP: L2TP0 connection service standby.
Oct 29 03:14:42 ndhcps: _WEBADMIN: NDM DHCP server stopped (exit status: 0).
Oct 29 03:14:42 ndhcpc: Switch0/VLAN2: NDM DHCP client stopped (exit status 0).
Oct 29 03:14:44 ndnproxy: ndnproxy stopped.
Oct 29 03:14:44 ndhcps: _WEBADMIN: NDM DHCP server (version 2.9.8) started.
Oct 29 03:14:44 ndm: Core::Server: started a new session.
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: NDM DHCP client (version 2.9.8) started.
Oct 29 03:14:44 ndhcps: _WEBADMIN: load dynamic lease: 192.168.1.33 64:70:02:0d:08:41 24930 Chief
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: DHCP client state is PREINIT
Oct 29 03:14:44 ndhcps: _WEBADMIN: add dynamic lease: 192.168.1.33 64:70:02:0d:08:41 24930 requested no Chief unknown
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: starting client script with reason "deconfig"
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: script /var/run/ndhcpc-eth2.2 run with action "deconfig", environment variables: "interface=eth2.2 "
Oct 29 03:14:44 ndm: Core::Session: client disconnected.
Oct 29 03:14:44 ndnproxy: ndnproxy 1_0_6 started.
Oct 29 03:14:44 ndnproxy: static entry added: localhost. 127.0.0.1.
Oct 29 03:14:44 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.
Oct 29 03:14:44 ndnproxy: stats. file: /var/ndnproxymain.stat.
Oct 29 03:14:44 ndnproxy: can not create IPv6 output socket for RPC requests, continue.
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: client script returned no error
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: raw socket mode set
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: DHCP client state is INIT
Oct 29 03:14:44 ndhcpc: Switch0/VLAN2: sending DISCOVER
Oct 29 03:14:51 ndhcpc: Switch0/VLAN2: DHCP client state is INIT
Oct 29 03:14:51 ndhcpc: Switch0/VLAN2: sending DISCOVER
Oct 29 03:15:05 ndhcpc: Switch0/VLAN2: DHCP client state is INIT
Oct 29 03:15:05 ndhcpc: Switch0/VLAN2: sending DISCOVER
Oct 29 03:15:10 ndm: Core::Debug: system debug disabled.
Oct 29 03:15:12 ndm: UPnP::Manager: redirect table is empty.
Oct 29 03:15:14 ndm: UPnP::Manager: redirect table is empty.
[E] Oct 29 03:15:14 ndm: lib::libndmCore: failed to send a source file.
Oct 29 03:15:14 ndm: Network::Interface::PPP: L2TP0 connection service standby.
Oct 29 03:15:14 ndhcpc: Switch0/VLAN2: signal 15 caught
Oct 29 03:15:14 ndhcpc: Switch0/VLAN2: process state is EXIT
Oct 29 03:15:14 ndhcps: _WEBADMIN: signal 15 caught
Oct 29 03:15:14 ndhcps: _WEBADMIN: NDM DHCP server stopped (exit status: 0).
Oct 29 03:15:14 ndhcpc: Switch0/VLAN2: NDM DHCP client stopped (exit status 0).
Oct 29 03:15:16 ndnproxy: ndnproxy stopped.
Oct 29 03:15:16 ndhcpc: Switch0/VLAN2: NDM DHCP client (version 2.9.8) started.
Oct 29 03:15:16 ndhcps: _WEBADMIN: NDM DHCP server (version 2.9.8) started.
Oct 29 03:15:16 ndm: Core::Server: started a new session.
Oct 29 03:15:16 ndm: Core::Session: client disconnected.
Oct 29 03:15:16 ndnproxy: ndnproxy 1_0_6 started.
Oct 29 03:15:16 ndnproxy: static entry added: localhost. 127.0.0.1.
Oct 29 03:15:16 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.
Oct 29 03:15:16 ndnproxy: stats. file: /var/ndnproxymain.stat.
Oct 29 03:15:16 ndnproxy: can not create IPv6 output socket for RPC requests, continue.

[/spoiler]

  Показать содержимое

А почему лог за 29 октября?

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
14 минут назад, V_V_S сказал:

А почему лог за 29 октября?

При включении роутера по умолчанию стоит эта дата, время должно обновляться при подключении к сети через таймсервер.

Лог сделан вчера.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
1 час назад, Юрий-76 сказал:

"Вход в интернет по IPoE доступен только с компьютера, подключенного к сети Билайн"

Я так и предполагал, вам не нужна авторизация по L2TP , удалите ее или сбросить  к заводским установкам, я не помню как в белой гиге называется IPOE , в общем оставьте ДНСР или Автоматическое получение адреса.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
11 часов назад, NikIv сказал:

Я так и предполагал, вам не нужна авторизация по L2TP , удалите ее или сбросить  к заводским установкам,........., в общем оставьте ДНСР или Автоматическое получение адреса.

Удалил L2TP, создал IPOE соединение, прописал вручную всё что знал, ибо IP автоматически адреса не назначает, включая МАС адрес карты. О чудо, загорелась лампочка на роутере, и в системном мониторе появился зеленый свет, но доступа в интернет всё равно нет...

779509499_01.thumb.jpg.d7891656f67df234444bbf90ad09066a.jpg

175742602_02.thumb.jpg.cd86d9f295c32eb734d43210c81bce4a.jpg

Буфер обмена02.jpg

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
7 часов назад, Юрий-76 сказал:

прописал вручную всё что знал, ибо IP автоматически адреса не назначает,

А вот все в ручную это неправильно, кроме мак адреса, оставьте на автомате получение.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
8 часов назад, Юрий-76 сказал:

ибо IP автоматически адреса не назначает,

 

56 минут назад, NikIv сказал:

оставьте на автомате получение.

автоматическое получение IP не работает

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
11 минут назад, Юрий-76 сказал:

автоматическое получение IP не работает

При подключении по IPoE должно быть автоматическое получение адреса, вы же не знаете какие именно адреса должны вам выдаваться.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
25 минут назад, NikIv сказал:

должно быть автоматическое получение адреса

так его нет! куда копать дальше?

я подключил другой роутер, UPVEL, он подключился и я с его настроек переписал все адреса.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах
20 минут назад, Юрий-76 сказал:

так его нет! куда копать дальше?

Я бы в таком случае обратился с вашим вопросом на форум https://forum.keenetic.net/

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Войти

Уже зарегистрированы? Войдите здесь.

Войти сейчас